'M' Series Sensors

Typical features and options for our "M" sensors include:
  • Internal electronics for enhanced noise immunity
  • Digital output option for use with a JR3 DSP-based receiver card
  • Analog output option for use with pre-existing data acquisition systems
  • Half-bridge strain gage configuration for cost-effectiveness
  • Fewer internal loading flexures for cost-effectiveness
  • ISO 9409 standard bolt patterns with captive screws for easy, no-adapter-plate-needed installation

Typical specifications:
  • Accuracy of nominally 1% of Full Scale (FS)
  • Repeatability better than absolute accuracy
  • Linearity of 0,5% of FS from +FS to -FS
    and 0,1% of FS at loading below 1/4 FS
  • Resolution of 1/4000 FS

To view technical specifications, interface drawings,  overload equations, and  general information on our "M" Series sensors, visit the Document Center.
As of 6 Jan 2010  lead time for sensor delivery is 9-14 weeks depending upon model and availability.
Our "M" Series comprises our most popular sensors, often providing the best combination of cost vs. performance.

The "M" designator in the first section of the model number denotes the use of millimeters to define the sensor's nominal size. For example, a 100M40 sensor has a nominal diameter of 100mm and a nominal thickness of 40mm.


JR3,
Inc.